7" DustBuddie XP with 18" Hose

7" DustBuddie XP with 18" Hose

MSRP: $109.95

In Stock

  Find a Local Dealer
Save on Shipping. Get it today.

  • Vacuum shroud used in dust containment while grinding with angle grinders
  • Fits most 7-inch to 9-Inch angle grinders
  • Fits collars 3-inch down to 1.8-inch
  • Made of glass-filled nylon for abrasion resistance and rugged durability
  • Sliding front edge of shroud for grinding close to a wall or edge
  • Replaceable brush skirt improves dust collection
  • Complies with OSHA silica laws and EPA Regulations for point-of-origin dust containment when used wi

  Go to Technical Specs

  Find a Local Dealer
Save on Shipping. Get it today.


Add Accessories:

Included With This Product:

  • (1) 7” DustBuddie XP
  • (1) 18” Adapter Hose
  • (3) Spacing Washers
  • (1) Releasable Tie

"I was working on a concrete slab while LIVING in the house...This worked flawlessly."

- Amanda H.

Universal Fit

Some people buy a grinder just for the included shroud. Don’t buy a new one—use the grinders you already have.

The DustBuddie XP is meant to fit most 7-9” grinders. If you know the collar diameter of your grinder, the DustBuddie XP will fit collars between 3” and 1.8”

Click here for help in determining if your grinder is compatible with this shroud.

Click here for help in determining if your grinder is compatible with this shroud.

"Amazingly little dust. Used in a basement and didn’t even need a dust mask."

- Pointe Lumber

Captures 99% of Dust

The DustBuddie XP captures nearly all dust generated while sawing. Using vacuum suction, the dust and debris are caught, giving you a truly dustless work environment.

This protects you and your workers from breathing harmful silica dust while keeping the area dust free, saving time and money in cleanup.

Patented Floating Head Design

The installation is quick an easy. Slip the shroud head around the grinder collar and tighten one screw.

The patented “floating head” design allows a flexible fit to your grinder. This allows the grinder to contour to the surface, keeping maximum dust containment while allowing you to grind naturally without a stiff fit.

Three spring mounted brackets allow pressure to be applied on any side for a full range of mobility.

OSHA Silica Law Compliant

In September 2017, strict laws passed and enforced by OSHA go into effect limiting silica dust exposure. Penalties and fines can be severe.

When used with a vacuum system of 175 CFM the DustBuddie XP is compliant with OSHA and EPA laws, keeping you and your workers safe from legal action and protecting you from harmful diseases caused by silica exposure.

Check out our Silica Wizard, a tool designed to help you know how to comply with the new silica laws.

Installation and Setup

1. Tighten the DustBuddie around grinder collar

2. Install appropriate grinding wheel

3. Attach the dust shroud to your vacuum

Technical Specs

Sliding edge for grinding against walls

Brush skirt bottom creates seal

Included adapters work with 1.5” hose or 2” hose cuffs

UPC 617450458505
Length 10 in.
Width 10 in.
Height 5 in.
Weight 3 lbs
Color Clear
Hose Length 1.50 ft
Warranty 90 Day
Port Size 1.25"

  Find a Dealer
Save on Shipping. Get it today.


Terms of Use   |   Privacy Policy   |  
© Copyright 2018 Dustless Tools.® All rights reserved.