DustBuddie for Flatwork & Cutting Concrete

  • slide 1 thumbnail
  • slide 2 thumbnail
  • slide 3 thumbnail
  • slide 4 thumbnail
  • DustBuddie for Flatwork video thumbnail


DustBuddie for Flatwork & Cutting Concrete

Item # D0084

MSRP: $407.99

In Stock

  Find a Local Dealer
Save on Shipping. Get it today.
   OR   

  • Vacuum shroud used in dust containment while using gas powered saws for flatwork
  • 2018 Pro Tool Innovation Awards Finalist , Dust Collection Shroud Category
  • Fits most gas powered cut off saws and captures up to 90% of dust while cutting concrete
  • Made of aluminum for rugged durability
  • Polyethylene sliders to protect the work surface
  • Connects to a 2" soft hose cuff
  • Complies with OSHA Silica Rule when used with objective data (see link below)
  • Requires a 260 CFM vacuum system for full containment (2 wet dry vacuums or one industrial vacuum)


Features

DustBuddie for Flatwork

Some people buy a saw just for the included shroud. Don’t buy a new one—use the saws you already have. If you rely on one saw or many, you don’t have to worry about buying a new saw for dust containment.

The DustBuddie is meant to fit most gas powered cut off saws. Included with the DustBuddie is a bolt kit meant to fit many models from a variety of manufacturers. It attaches to 2" hoses using a 2" soft hose cuff.



Technical Specs

UPC 617450400849
Length 30.25 in.
Width 6.25 in.
Height 6.25 in.
Weight 6 lbs
Color Black
Warranty 90 Day
Port Size 2"

Wide mouth captures dust directly from blade



Universal mounting bracket



Industrial bungee for safe transport

Included With This Product:

  • (1) DustBuddie for Flatwork
  • (1) Universal Mounting Bracket
  • (1) Bolt Kit



Without dust collection, exposure to silica dust is harmful and costly. The DustBuddie for Flatwork protects your lungs and your saw. The DustBuddie for Flatwork is easily installed by unscrewing the floor mount of your gas-powered saw, and replacing it with an easily screwed in place pivoting mount. This pivoting mount fits Stihl, Makita, Husqvarna, and other cut-off saws. The pivoting mount connects to the DustBuddie for Flatwork through a small, sturdy lock-in-place pin. The DustBuddie for Flatwork features lightweight aluminum construction, low-friction polyethylene sliders, and a bungee designed for secure transportation. The DustBuddie for Flatwork requires 25 CFM per inch of blade diameter. This requirement can be met by using a 'Y' connector between two vacuums with 130 CFM, totaling 260 CFM. The DustBuddie for Flatwork collects 90% of airborne concrete dust. Using a gas-powered saw to cut concrete creates large dust clouds. There are no dust clouds when using a gas-powered saw to cut concrete with the DustBuddie for Flatwork. You can visit our website at dustlesstools.com or call us at 800-568-3949.

"With the new silica guidelines, it's nice to have a shroud that works with my saw."

- Ryan Greenfield


"It saves time & money by cutting down the mess and cleanup time that comes with wet cutting."

- Ryan Greenfield

Installation and Setup


1. Attach bracket to the saw


2. Secure with one bolt


3. Hook up your dust shroud to your vacuum system

  • Features & Specs

    Features

    DustBuddie for Flatwork

    Some people buy a saw just for the included shroud. Don’t buy a new one—use the saws you already have. If you rely on one saw or many, you don’t have to worry about buying a new saw for dust containment.

    The DustBuddie is meant to fit most gas powered cut off saws. Included with the DustBuddie is a bolt kit meant to fit many models from a variety of manufacturers. It attaches to 2" hoses using a 2" soft hose cuff.



    Technical Specs

    UPC 617450400849
    Length 30.25 in.
    Width 6.25 in.
    Height 6.25 in.
    Weight 6 lbs
    Color Black
    Warranty 90 Day
    Port Size 2"

    Wide mouth captures dust directly from blade



    Universal mounting bracket



    Industrial bungee for safe transport

  • Includes

    Included With This Product:

    • (1) DustBuddie for Flatwork
    • (1) Universal Mounting Bracket
    • (1) Bolt Kit

  • Videos



    Without dust collection, exposure to silica dust is harmful and costly. The DustBuddie for Flatwork protects your lungs and your saw. The DustBuddie for Flatwork is easily installed by unscrewing the floor mount of your gas-powered saw, and replacing it with an easily screwed in place pivoting mount. This pivoting mount fits Stihl, Makita, Husqvarna, and other cut-off saws. The pivoting mount connects to the DustBuddie for Flatwork through a small, sturdy lock-in-place pin. The DustBuddie for Flatwork features lightweight aluminum construction, low-friction polyethylene sliders, and a bungee designed for secure transportation. The DustBuddie for Flatwork requires 25 CFM per inch of blade diameter. This requirement can be met by using a 'Y' connector between two vacuums with 130 CFM, totaling 260 CFM. The DustBuddie for Flatwork collects 90% of airborne concrete dust. Using a gas-powered saw to cut concrete creates large dust clouds. There are no dust clouds when using a gas-powered saw to cut concrete with the DustBuddie for Flatwork. You can visit our website at dustlesstools.com or call us at 800-568-3949.

  • Reviews

    "With the new silica guidelines, it's nice to have a shroud that works with my saw."

    - Ryan Greenfield


    "It saves time & money by cutting down the mess and cleanup time that comes with wet cutting."

    - Ryan Greenfield

  • Installation & Setup

    Installation and Setup


    1. Attach bracket to the saw


    2. Secure with one bolt


    3. Hook up your dust shroud to your vacuum system






Proposition 65 Warning for California Residents

warning symbolWARNING: This product can expose you to chemicals including hexavalent chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.


  Find a Dealer
Save on Shipping. Get it today.
   OR