Item # H0901
Included With This Product:
The Slurry Vac has an astonishing boxed water lift of 130 inches. This allows the user to pull water at ground level up to 100 feet away.
Using the included slurry wand kit, the intense suction makes for easy cleanup of slurry residue at jobsites and can be used with dust shrouds for wet grinding, cutting, sawing, and drilling.
For convenience in removing or relocating slurry on jobsites, the Slurry Vac topper fits any standard 55-gallom drum. Simply lift the vacuum off one and put it on another.
We recommend using steel drums, as the suction from the vacuum will crush drums made out of other metals or plastics.
The internal float system prevents the vacuum from overflowing and damaging the motor. When you hear the vacuum get high pitched, it has reached capacity. Simply dump the drum or switch the barrel and you’re back to work.
The velcro filter wraps around the float for full filtration while being easy to reach, clean, and reinstall.
Each Slurry Vacuum is built right here at our facility in Price, Utah, USA. Down to the smallest nut, each component is hand installed by our production team. This ensures you get a quality vacuum while having readily available access to any replacement part big and small.
Our own in-house Research and Development team designs, improves, tests, and retests to make sure these vacuums are top-of-the-line and that they comply with the latest laws.
Easy carry handles for switching drums
Industrial crush-proof, kink-proof hose
|Water Lift||120.00 in|
|Air Flow||114.00 CFM|
|Cord Length||15.00 ft|
|Hose Length||25.00 ft|
|Port Size||1.5"" OD|
Proposition 65 Warning for California Residents
WARNING: This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer, and hexavalent chromium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.